17 Full Time jobs

Seeking full time employees to work in a glass production plant. These positions require the handling of glass and various other products pertaining to the glass industry. The individual may have the opportunity to work in cutting, fabricating, insulating, or lamination. Both day and night shifts are available. These positions require frequent bending, twisting, standing and reaching. The individual will be standing and walking on a concrete floor wearing steel-toed shoes, as well as other protective gear for long periods of time. The work environment will be a manufacturing shop that is subject to EXTREME heat. Must be able to work mandatory overtime as required with little to no notice. This position requires the ability to: * Use various lifts and cranes, * Must be detail oriented * Must be able to work quickly in an extremely fast paced environment * Must be able to lift up to 75 lbs. on a regular basis * Must be able to read, understand and communicate paperwork and labels * Must be able to understand units of measure and be able to read a tape measure * Must be willing to work in other departments as needed * Must be safety conscious and hard working. 1-2 years preferred experience in assembly or manufacturing. Must be able to pass pre-screening requirements.

Seeking full time employees to work in a glass production plant. These positions require the handling of glass and various other products pertaining to the glass industry. The individual may have the opportunity to work in cutting, fabricating, insulating, or lamination. Both day and night shifts are available. These positions require frequent bending, twisting, standing and reaching. The individual will be standing and walking on a concrete floor wearing steel-toed shoes, as well as other protective gear for long periods of time. The work environment will be a manufacturing shop that is subject to EXTREME heat. Must be able to work mandatory overtime as required with little to no notice. This position requires the ability to: * Use various lifts and cranes, * Must be detail oriented * Must be able to work quickly in an extremely fast paced environment * Must be able to lift up to 75 lbs. on a regular basis * Must be able to read, understand and communicate paperwork and labels * Must be able to understand units of measure and be able to read a tape measure * Must be willing to work in other departments as needed * Must be safety conscious and hard working. 1-2 years preferred experience in assembly or manufacturing. Must be able to pass pre-screening requirements.

Candidate will write Mastercam programs for multi-axis Haas Vertical Mill. Will use Mastercam and SolidWorks software to create/adjust programs. Perform machine set-ups including tooling specification and operate machine. Qualifications: Ability to create and adjust 3, 4 & 5 Axis programs using Mastercam for Haas CNC Mill without supervision. Experience with CNC Lathe programming, setup and operation desired. Advanced experience in SolidWorks to develop part and fixture data for programming CNC machines. Set-up tooling and accessory equipment (4-axis Indexer / 5-axis Trunnion) and make necessary adjustments on CNC Mill. Be able to handle projects from print to part without supervision. Possess an analytical mind that is able to do math calculations and create a fixture for parts. Must be able to read/understand blueprints and precision measuring instruments. Focused and detail-oriented individual with an ability to work in a fast-paced environment. Must be able to follow all work instructions and procedures under Quality Management System. Ensure all documentation is complete and correct. Ensure effective and proper communication with other departments. Maintain a positive work atmosphere by acting and communicating accordingly with colleagues and management. Adhere to safety rules according to company policy and procedures. Maintain a clean and organized work area. Experience: CNC Machinist: 5 years experience (Required) - (Haas controller preferred) Multi-axis programming, setup and operation - 5 years experience Must have Hurco experience Pay is dependent on experience. Job Type: Full-time Salary: $15.00 to $22.00 /hour

* Perform complex assembly of commercial size snack food equipment; including: installation and hardware assembly • Evaluate drawings to ensure proper procedures are followed • Ensure all assembly tasks are completed to meet customer's specifications and within company's guidelines. • Inspect assembled products to ensure accuracy and document issues requiring attention. • Implement continuous improvement practice to reduce errors • Provide assistance to production process • Evaluate finished products and perform quality checks on products. • Assemble units and perform modification and repair work if required. • Perform duties as assigned, following written and verbal instructions.

We are currently seeking a Shipping and Receiving Clerk to join our exciting, fast paced team. Key Responsibilities: Examine contents and compare records, such as manifests, invoices, or orders, to verify accuracy of incoming or outgoing shipment. Prepare documents, such as work orders, bills of lading, and shipping orders to route materials Determine shipping method for materials, using knowledge of shipping procedures, routes, and rates Record shipment data, such as weight, charges, space availability, and damages and discrepancies, for reporting , accounting, and record keeping purposes. Contact carrier representative to make arrangements and to issue instructions for shipping and delivery of materials. Confer and correspond with establishment representatives to rectify problems, such as damages, shortages, and nonconformance to specifications. Requisition and store shipping materials and supplies to maintain inventory of stock. Deliver or route materials to departments, using work devices, such as hand truck and forklifts. Schedule routine maintenance on Forklifts and complete daily and weekly upkeep. Pack, seal, label, and affix postage to prepare materials for shipping, using work devices such as hand tools, power tools, and postage meter. Applicant must be able to : Have a working knowledge of Fed Ex Ship Manager, UPS World Ship, and Freight logistic, Air and Truck. International freight experience a plus Lift up to 75 pounds

Compensation: $13.00 per hour Benefits Offered: Medical, Vision, Life, Dental, 401K Employment Type: Temp-to-Hire (Full-Time) Schedule: Mon-Fri (8:00 AM – 5:30 PM) Mandatory Overtime: Occasional Saturdays (9:00 AM – 2:00 PM) We have a client in search of experienced candidates for a variety of different positions. This will exclusively be a general labor position. No machinery will be involved, but this is subjected to change depending on qualifications and experience. Qualified candidates will have the following or related experience: - Plumbing - Electrical Wiring - Sheet Metal - Roofing - Dry Wall - Painting - Rough Carpentry - Finish Carpentry - Mechanical Repair - Tape Measure - Power Tools - Welding - Forklift Candidates are required to have at least minimal experience performing the skills that has been listed or have related experience, within preferably 6 months to a year plus timeframe. Any construction experience is a plus. Anyone interested in this opportunity will be subjected to a background check and drug screen. Our client will not be accepting candidates who have either assault, or theft felonies on their background.

Summary: A1 Staffing is an agency that specializes in meeting the demands for Light industrial, medical, government/state agencies, and administrative offering temporary, professional placement, and contract personnel. We are growing and looking to add to our business development management team in Dallas. We focus on delivering the highest quality product to our clients through investing time in our recruiting process. We are seeking an energetic, hardworking sales professional to be responsible for new and existing business development and account management.We offer a generous base salary plus commission and a great benefits package. Specific Duties and Responsibilities: Bringing new business to new and existing clients across Dallas and surrounding areas. Exceed sales revenue quotas by new contracts and job orders through prospecting and developing new customer relationships. Analyze existing accounts, competition and market share in the territory. Generate sales leads, cold-call prospects, and set meetings on a daily basis. Identifies and qualifies sales opportunities by providing a consultative and value-added approach to develop relationships. Negotiates contractual terms and conditions for employment services, and works with the operations and recruiting teams to fill job orders. Negotiate rates and contracts with new and existing clients. Build and implement strategies to develop relationships and expand business with new and existing clients. Outline and develop lead generation strategies and marketing plans for new accounts and existing accounts. Maintains an ongoing relationship with prospective clients, both in-person and by phone, continuously assessing and communicating how A1 Staffing is able to meet their needs. Develops and executes sales presentations to potential clients and proposals. Create and maintain a sales and marketing plan. Develop strategy to improve and expand existing accounts. Performs other duties as assigned. Requirements: Would like 2 + years of sales experience in the staffing industry 2+ years of outside sales experience Strong relational and networking skills Adept problem solving skills, ability to think outside the box, and to implement new ideas Self-motivated and results-driven Excellent communication and presentation skills Sense of urgency for client needs Ability to work under pressure Strong organizational and time management skills Ability to work well in a fast-paced and rapidly changing environment Ability to contribute as a team player Must exhibit discipline, patience, and grace in working with others This is a salary position with a nice commission structure as well.

We are seeking a Bilingual Customer Service Specialist to work in our Status Department. You will be responsible for calling clients to update them on the status of their legal claim with the department. Responsibilities: Handle customer inquiries and status questions regarding case Provide information about client cases Call clients to inform them of new information Document and update customer records based on interactions Develop and maintain all documents for each case ​ Qualifications: Previous experience in customer service, sales, or other related fields Ability to build rapport with clients Ability to prioritize and multitask Positive and professional demeanor Excellent written and verbal communication skills

Production Associate will be working in warehouse environment. Must have a proven mechanical ability. Have knowledge of work history of shipping and receiving. Be able to understand written directions and solve mathematical challenges with use of a calculator. Forklift experience and pallet jack. Be able to multitask good communication skills and knowledge of MS Office Suite. Must have experience with forklifts, pallet jacks. Hours are Monday-Friday 8-4:30.

The CNC machinist operates computer numerical control machines to fabricate parts. The CNC machinist loads parts in the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. They adjust the machine to control speed, material feed and path of the cut, as well as make sure the machines are set up properly, working well, and producing quality product. They review the finished product to ensure it is defect-free and ready for the next step in production. They also maintain a safe, organized and clean work environment. Essential Functions Translate the requirements of detailed part drawings into measurements for production Detects and reports defective materials or questionable conditions to shop foreman or person designated Inspects and maintains the work area and equipment in a clean, orderly condition and follows prescribed safety procedures Regularly performs milling, turning, drilling, tapping, de-burring, sawing and sanding tasks Inspects machined products, and documents results Assists in other work areas to perform fabrication, lay-up, infiltration, furnace operation and sand blasting tasks Skills Strong basic math skills including decimals and fractions Ability to work with gauges and calipers Extensive knowledge of machinist maintenance and operation Familiarity with Fanuc 6T controls, hollow-spindle lathes, vertical & horizontal mills with Haas, Fanuc, Mazak, or Mitsubishi controls Education and Experience Required: High school diploma or Equivalent or prior experience as a CNC machinist can substitute for education Preferred: prior experience as a CNC machinist or using production machinery Physical Requirements & Work Environment Regularly required to communicate and hear; frequently required to stand; walk; use hands to handle or feel; and reach with hands and arms. The position requires frequent lifting, pushing and pulling objects that are 50 pounds or lighter. The employee is frequently exposed to fumes or airborne particles, vibration, and moving mechanical parts. Noise level in the shop may be loud. Pay: Based on Experience Schedule: 2nd Shift

Job Summary: The Assembler is responsible for assembling product on line by following specific instructions for individual process steps. Essential Job Functions: Build product on assembly line. Build sub-assemblies and finished product from various parts, by using tools and reading instructions. Perform all functions on assembly line. Perform quality and function checks on all final products. Meet or exceed certification requirements for position. Comply with all safety policies, practices, and procedures. Report all unsafe activities to Trainer, Lead, or Supervisor. Participate in proactive team efforts to achieve departmental and company goals. Perform other duties as assigned. Perform housekeeping duties. Qualifications: Must be proficient with verbal and written communication skills. Must have strong attention to details skills. Ability to manage projects. Must have analytical and critical thinking skills. Ability to operate Computers, Printers, CTS Tester, Scales, Hoists. Must have valid driver’s license Must pass background check and drug screen. Physical Requirements: Standing, walking continuously Talking, hearing, listening Use of hands to handle and feel objects Reaching with hands and arms Lifting, pushing, pulling up to 75lbs Schedule: 1st and 2nd shifts available

TITLE: Coding Specialist II ( temp to perm) POSITION INFORMATION: Responsible for abstraction and accurate coding of procedures from various forms and medical records to ensure optimal reimbursement and compliance with all regulations, policies and procedures. REPRESENTATIVE DUTIES: 1. Coding a. Abstracting and coding (CPT and ICD) procedures and diagnosis from medical records. b. Verify medical record documentation requirements. c. Review charging procedures to insure compliance with Federal Regulations, Medicare and Medicaid Policies, etc. d. Functions as advisor/educator to faculty in regard to charge documentation, diagnosis and procedure coding and charge policies. 2. Reimbursement analysis a. Responsible for verifying that CPT, HCPCS & ICD coding used is correct. b. Responsible for verifying that payment is correct for CPT, HCPCS & ICD coding used. c. Verify that correct interpretation was used in the calculation of writeoffs. d. Responsible for following the policies and procedures of the unit and the department. e. Researches projects to find additional money. f. Coordinates and/or trains staff on reimbursement procedures. g. Monitor monthly financial flow charts to detect problems. h. Performs charge corrections. i. May supervise others in the reimbursement or coding areas of the organization in the absence of other supervisors. 3. Patient scheduling 4. Patient registration a. Review patient admitting records and extracts relevant information b. Records patient identification and demographic information in the computerized billing system c. Contacts agency representatives to verify type and extent of coverage. 5. Charge entry a. Performs preliminary review of source documents to determine that sufficient data are present for processing b. Using alphanumeric keyboard, transcribes and/or verifies data from source documents to the medium used for entering data into the computer c. Batch charges d. Generate hash totals e. Enter charges f. Balances batches by comparing batch proofs to source documents and hash totals 6. Billing a. Works with all areas of the organization in getting any necessary or requested documentation for patients, insurance carriers or other areas. b. May interact with hospital patient accounting or records personnel to obtain patient demographic or other billing information c. Operates hospital information system terminal to obtain patient demographic information, patient insurance information and status of approvals or denials d. Completes processing of all inpatient and outpatient documents received on a daily basis e. Assists in resolving department problems with IDX billing f. Maintains records of charges, payments, third party charges, etc. 7. Collection a. Answers patient’s questions regarding statements, agency coverage, etc. b. Handles correspondence regarding collection activity and records results c. Identify patient accounts for collection action when accounts become delinquent or when unable to contact patient or responsible party d. May receive patient payments and/or issue payment receipts 8. Followup a. Initiates contact with patients and/or third party carriers if there is a delay in responding to statements or claims b. May process incoming and outgoing mail c. May receive incoming telephone calls and resolve issues communicated d. Records results of mail and telephone contacts on the computer billing system e. Contacts insurance carriers regarding nonpayment and/or improper payment of claims f. Reviews denials g. Interfaces with patients, physicians, and others regarding professional billing operations and funds 9. Payment posting a. Post receipts to proper patient accounts b. Posts denials c. Compare batch proofs and source documents for accuracy 10. Reporting a. Assists in reviewing and balancing IDX transaction reports for administration b. Reconciles daily IDX receivables reports c. Prepares billing statements from statistical data 11. Credit balance resolution a. Review daily billing and accounts receivable credit balance reports b. Prepare daily refund check requests c. Prepare other daily credit balances other than refunds d. Post refund checks to patient accounts e. Mail refund checks with supporting documentation 12. As Needed. Performs various duties as needed to successfully fulfill the function of the position. REQUIREMENTS: Education: High School diploma or GED Experience: 6 months experience with medical insurance, billing, or clinical coding MUST be CPC, which is Certified Professional Coder

A1 Staffing & Recruiting has SEVERAL Openings for one of Oklahoma’s premier employers and we are looking for TOP TALENT Candidates and we are specifically looking for candidates who would like to build their career and grow with a terrific company. We are looking for candidates who have a background in MANUFACTURING. Auto body and Fiberglass is a big plus. Must have experience using power tools. The company offers very competitive benefits including 90% paid health insurance, 401K matching, uniforms, ST-LT disability, OVERTIME AVAILABLE, and life insurance. Our client is growing at a rapid rate!! OTHER REQUIREMENTS MUST have Stable Work History MUST be able to pass MEASURING TAPE TEST MUST have experience with Power Tools MUST be able to pass a Drug Screening and Pre-Employment Screening ESSENTIAL FUNCTIONS Detail parts by correcting minor defects such as scratches and marks left by mold or the assembly process to ensure a defect-free product. Assemble parts in an efficient manner ensuring all components are functional. Operate power and hand tools. Ensure proper tools are used for specific functions. Perform basic maintenance on all tools. Tools will be inspected regularly for adjustment or maintenance. Clean work area throughout the day to avoid causing a cluttered area. Strict Attendance Policy. Report to work as scheduled without tardiness, leaving early or absence, unless arranged for in advance with supervisor. Follow all safety procedures and wear personal protective equipment as required. PHYSICAL DEMANDS Ability to lift to 50 lbs. Repetitive wrist/arm motion for extended periods of time. Good eyesight required for ability to see fine detail work. Perform work in awkward positions. Ability to wear respirator and protective eye wear. Pay: $12 an hour and $18 an hour for Overtime. Overtime is required and will work up to 60 hours

We are hiring for a Shop Hands with a SE Oklahoma City, OK client. This client manufactures steel piping for many industries. Must be able to work in the elements, have a valid diver license, good work history, be able to pass a measuring tape test and can work up to 12 hours a day. Pay ranges from $13-$15 based on experience. Schedule: 6 am-2:30 pm M-F plus overtime hours. Job Duties: Work with a manufactured steel pipe. Must be able to pass measuring tape test. Work in the elements. Forklift experience a plus. Have a valid Driver License. Has strict Attendance Policy. Must wear PPE Stable work History required.

We are seeking a Circuit Board Assembly to become an integral part of our team! You will perform assembly line tasks as well as identify areas of improvement to increase efficiency. Responsibilities: Work with a team to assemble entire products or components Rotate through tasks for specific production processes Conduct quality inspections on products and parts Prepare finished products for shipment Maintain a clean and orderly work area Qualifications: Previous experience in manufacturing, assembly, or other related fields Familiarity with assembly tools and soldering equipment Ability to handle physical workload Ability to work well in teams Ability to thrive in a fast-paced environment There are 2 shifts available: 6:00 AM-2:30 PM or 7:00 AM-3:30 PM. Job Type: Full-time Salary: $10.00-$12.00 DOE

We are looking for experienced concrete finishers to work at our precast/prestressed concrete plant facility. These skilled individuals will work in an indoor/outdoor environment finishing surfaces of freshly poured concrete for projects such as stadium risers, bridges and other precast and pre-stressed building components. This position has additional duties including formwork cleanup/set-up, steel tying and the ability to follow instructions. If you have prior experience working with large concrete slabs utilizing hand tools and/or power tools such as: floats, trowels and screeds in order to spread concrete to specified depth and consistency plus, take pride in knowing your work meets high standards for the company and the customer please look at joining our team of hardworking individuals. Job Duties: Laying mesh Tying reinforcing bars Tying steel Setting inserts Striking off Stripping forms Cleaning up